View Single Post
  #51 (permalink)  
Old 15-07-2008, 02:58 AM
jephree's Avatar
jephree jephree is offline
¨*·.¸ «.·°·..·°·.» ¸.·*¨
 
Join Date: Jun 2004
Posts: 25,328
jephree is beginning to become part of the furniturejephree is beginning to become part of the furniturejephree is beginning to become part of the furniturejephree is beginning to become part of the furniturejephree is beginning to become part of the furniturejephree is beginning to become part of the furniturejephree is beginning to become part of the furniturejephree is beginning to become part of the furniturejephree is beginning to become part of the furniturejephree is beginning to become part of the furniturejephree is beginning to become part of the furniture
Re: MapleStory - "failed in finding proper screen mode for Gr2D"

Intel makes the chips but not the computer.

Yours appears to have been custom made.


I can walk you through some steps but they are not without risk. If playing MapleStory is your only problem you might want to just forget about it on this computer.

Otherwise I can suggest things you can try to troubleshoot.

You might want to clear any further steps with your family or whatever. Just saying.


OK I found your motherboard:

ASRock Motherboard - Product - P4VM800 - Overview

Try this:

Turn off the computer and move the monitor plug on the rear.

It will be horizontal near the middle lower section.

Move it to the similar port (blue) which will be found vertical on the upper edge of the case.

See if this changes anything.

If it causes any problem in starting then just move it back.


Your computer has both an AGP ATI card as well as onboard VGA which is 3D.

We are trying to determine if your AGP ATI card is the problem by using the other port instead.


Also on reviewing your initial scan you only have 512MB RAM which is really low but that is another issue.
Reply With Quote