Thread: DISK BOOT FAILURE, INSERT SYSTEM DISK & PRESS ENTER
View Single Post
  #2 (permalink)  
Old 21-08-2004, 01:20 AM
jephree's Avatar
jephree jephree is offline
¨*·.¸ «.·°·..·°·.» ¸.·*¨
  
Join Date: Jun 2004
Posts: 25,328
jephree is beginning to become part of the furniturejephree is beginning to become part of the furniturejephree is beginning to become part of the furniturejephree is beginning to become part of the furniturejephree is beginning to become part of the furniturejephree is beginning to become part of the furniturejephree is beginning to become part of the furniturejephree is beginning to become part of the furniturejephree is beginning to become part of the furniturejephree is beginning to become part of the furniturejephree is beginning to become part of the furniture
Re: DISK BOOT FAILURE, INSERT SYSTEM DISK & PRESS ENTER
Just to test things I would first disconnect the older drive & make sure the new drive is set to be master; then see if the bios sees that.

You could also take the connection to your DVD and try that on the hard drive just to see if the bios sees that.

Check board connections ... somehow you gotta get the bios to see the drive.

When you say you "tried" to update the bios, did you have any problem with that update? or did you successfully update?
Reply With Quote