Content Top
DAL Computer Help » Hardware Help » Drivers » NEC/Packard Bell drivers

Recommended Fix

Click here to fix Windows Errors and Optimize Windows Performance

Need Computer Help?
Register Now for FREE

NEC/Packard Bell drivers

Reply
Thread Tools
Drivers
  #1 (permalink)  
Old 17-02-2006, 09:02 PM
Newbie
D-A-L Newbie
 
Join Date: Feb 2006
Posts: 1
jwtodd Is a beginner here at D-A-L
Angry NEC/Packard Bell drivers

I have an NEC Powermate 1200 CELERON desktop PC of some vintage.

I need a replacement driver for the motherboard and upon contacting NEC I am told that is a Packard Bell machine with their badge. Packard Bell do not recognise the PC serial number and therefore no support from them either.

Can anybody please help?

The PC's details are as follows:
System
Manufacturer : Packard Bell NEC
Model : Powermate, 1200 CELERON
Version : 00000001
Serial Number : PA99069923
ID : 3B84B120-11D67EEA-454E0080-49435F43

Mainboard
Manufacturer : NEC COMPUTERS INTERNATIONAL
MP Support : 1 Processor(s)
MPS Version : 1.40
Model : 6OF
Version : 1.0
System BIOS : 62-1029-001199-00101111-040201-i815

Memory Controller
Error Detection Method : ECC
Supported/Current Memory Interleave : 1-way / 1-way
Number of Memory Slots : 2
Maximum Installable Memory : 1GB
Maximum Module Size : 512MB
Supported SDRAM Speeds : PC66, PC100
Supported Memory Types : DIMM, SDRAM
Supported Memory Voltages : +3.3V

Physical/BIOS Memory Banks
ROW-0 (RASL-0 RASL-1) : 256MB DIMM SDRAM double-bank
ROW-1 (RASL-0 RASL-2) : 128MB DIMM SDRAM single-bank

Chipset 1
Model : Intel Corporation 82815/EM/EP/P 815/EM/EP/P (Solano) Host to I/O Hub Bridge
Bus(es) : AGP PCI IMB USB i2c/SMBus
Front Side Bus Speed : 1x 100MHz (100MHz data rate)
Maximum FSB Speed / Max Memory Speed : 1x 133MHz / 1x 133MHz
Width : 64-bit
IO Queue Depth : 4 request(s)

Chipset 1 Hub Interface
Type : Hub-Interface
Version : 1.00
Number of Ports : 1
Width : 8-bit
Full Duplex : Yes
Multiplier : 2/1x
Speed : 4x 66MHz (264MHz data rate)

Logical/Chipset 1 Memory Banks
Bank 0 : 128MB SDRAM 3-3-3-0
Bank 1 : 128MB SDRAM 3-3-3-0
Bank 2 : 128MB SDRAM 3-3-3-0
Speed : 1x 100MHz (100MHz data rate)
Multiplier : 1/1x
Width : 64-bit
Refresh Rate : 15.60オs
Power Save Mode : Yes
Fixed Hole Present : No

APIC 1
Version : 2.00
Speed : 16MHz
Multiplier : 1/2x
Maximum Interrupts : 24
IRQ Handler Engaged : Yes
Enhanced Support : Yes

Memory Module 1
Manufacturer : Micron
Type : 256MB SDRAM
Technology : 16x(16Mx8)
Speed : PC133U 3-3-3-5
Version : 1.2
Date of Manufacture : 14 November 2159
Set Timing @ 133MHz : 3-3-3-5

Memory Module 2
Manufacturer : Siemens
Model : HYS64V16300GU-75
Serial Number : 0118581B
Type : 128MB SDRAM
Technology : 8x(16Mx8)
Speed : PC133U 3-3-3-5
Version : 1.2
Date of Manufacture : 15 April 2002
Set Timing @ 133MHz : 3-3-3-5
Set Timing @ 100MHz : 2-2-2-6

Environment Monitor 1
Model : ITE IT8705/12 ISA
Mainboard Specific Support : No

Temperature Sensor(s)
CPU Temperature : 42.0ーC / 107.6ーF

Cooling Device(s)
Auto Fan Speed Control : No
Chassis Fan Speed : 3924rpm

Voltage Sensor(s)
CPU Voltage : 1.49V
Aux Voltage : 1.23V
+3.3V Voltage : 3.34V
+5V Voltage : 5.05V
+12V Voltage : 11.61V
-12V Voltage : - 12.03V
-5V Voltage : 4.05V
Standby Voltage : 5.00V
Battery Voltage : 3.33V

AGP Bus(es) on Hub 1
Version : 2.00
Speed : 2x 66MHz (132MHz data rate)
Multiplier : 1/2x
Fast-Writes Enabled : No
Side Band Enabled : Yes
Aperture Size : 32MB

PCI Bus(es) on Hub 1
Version : 2.20
Number of Bridges : 2
PCI Bus 0 : PCI (33MHz)
PCI Bus 2 : PCI (33MHz)
Multiplier : 1/3x

LPC Hub Controller 1
Model : Intel Corporation 82801BA LPC Interface (ICH2 B5 step)
ACPI Power Management Enabled : Yes
Delayed Transaction Supported : Yes
Delayed Transaction Enabled : No

LPC Hub Controller 2
Model : NEC Computer International 82801BA/BAM SMBus Controller (ICH2/ICH2-M B5 step)

USB Controller 1
Model : NEC Computer International 82801BA/BAM USB Controller #1 (ICH2/ICH2-M B5 step)
Version : 1.10
Interface : UHCI
Channels : 2
Speed : 48MHz
Supported Speed(s) : Low (1.5Mbps) Full (12Mbps)
Legacy Emulation Enabled : No

USB Controller 2
Model : NEC Computer International 82801BA/BAM USB Controller #2 (ICH2/ICH2-M B5 step)
Version : 1.10
Interface : UHCI
Channels : 2
Speed : 48MHz
Supported Speed(s) : Low (1.5Mbps) Full (12Mbps)
Legacy Emulation Enabled : No

System SMBus Controller 1
Model : Intel 801xx/63xx SMBus
Version : 0.05
Specification : 1.00
Advanced TCO Mode Enabled : No
Slave Device Enabled : No
PEC Support : No
Speed : 100kHz

Expansion Slot(s)
PCI1 (1h) : PCI 32-bit +3.3V Shared PME Full-Length Available (Intel Corporation 82815/G/EG/P/EP Solano AGP/PCI Bridge (GMCH/MCH B0-step))
PCI2 (2h) : PCI 32-bit +3.3V Shared PME Full-Length Available
AGP (4h) : AGP-4x 32-bit +3.3V Shared PME Full-Length Used
CNR (5h) : PC98/Card 2-bit +3.3V Shared PME Full-Length

Port Connector
COM Port - Serial Port A : Serial Port 16550A - None / DB-9 pin male
COM Port - Serial Port B : Serial Port 16550A - None / DB-9 pin male
LPT Port - Parallel Port : Parallel Port ECP/EPP - None / DB-25 pin female
Keyboard - Keyboard : Keyboard - None / PS/2
Mouse - PS/2 Mouse : Mouse - None / PS/2
Floppy - Floppy : None - Floppy Disk / None
Primary IDE - IDE-1 : None - ATA / None
Secondary IDE - IDE-2 : None - ATA / None
USB Port - USB : USB - None / USB
USB Port - USB : USB - None / USB
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #2 (permalink)  
Old 18-02-2006, 03:50 AM
jephree's Avatar
¨*·.¸ «.·°·..·°·.» ¸.·*¨
 
Join Date: Jun 2004
Posts: 25,328
jephree is beginning to become part of the furniturejephree is beginning to become part of the furniturejephree is beginning to become part of the furniturejephree is beginning to become part of the furniturejephree is beginning to become part of the furniturejephree is beginning to become part of the furniturejephree is beginning to become part of the furniturejephree is beginning to become part of the furniturejephree is beginning to become part of the furniturejephree is beginning to become part of the furniturejephree is beginning to become part of the furniture
Re: NEC/Packard Bell drivers

I found nothing directly from either NEC or Packard Bell but then searched as follows:

From your info above: Mainboard Model: 6OF I searched: NEC 60F motherboard

http://www.google.com/search?sourcei...0F+motherboard

Then: Atlantis (GA-60F V0.2) Flex-ATX form factor motherboard

http://www.google.com/search?lr=&ie=...%20motherboard

Then: Support Packard Bell uk - Product Page - Core - Atlantis P (GA-60F ...

http://support.packardbell.com/uk/my...odyssey_imedia

Perhaps you could try to physically ID the board from the pic at that site.

There is a BIOS and Chip Set driver at the bottom of that page if you feel like it is a match.
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Reply


Thread Tools

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
First we'll take Gateway, then we'll take Packard Bell jephree A Question to the community! 1 29-08-2007 01:31 AM
i have a packard bell!! HELP! Ice Blast General Internet Issues and Questions 1 30-12-2006 10:04 PM
Packard Bell Problems! conall_hanna General Hardware Issues 2 07-05-2006 06:27 PM
Packard Bell Easy One Silver a1janny Windows XP Help 3 18-11-2005 02:16 AM
Drivers For Packard Bell Imedia 5093 moejoe Drivers 1 03-12-2004 07:48 PM


All times are GMT +1. The time now is 08:34 PM.

Bottom Corner