kodak easy share soft ware

how can i stop kodak easyshare software loading on start up

Go to start-Run and type "msconfig". Go to the "startup" tab.

You can uncheck the program from the list there. That will stop it from running automatically at boot.

__________________
Jeff If you've been helped you tell your friends, and consider a donation Here to help support the forum. All donations are greatly appreciated

D-A-L Site and Help Forums Rules

Please do not PM me for help.These messages will be deleted without reading.
Please post your problem in the appropriate forum.

(Thanks )

yes it stpped kodak opening but then message appeared saying chose normal start up mode on the general tab to start normally i did this and kodak came back should i have ignored that message

do you use the software?

I have a Kodak camera but don't use the software the camera will still be seen by the PC using a USB cable

it may be that you have to remove it to stop it loading all the time

__________________
Jeff If you've been helped you tell your friends, and consider a donation Here to help support the forum. All donations are greatly appreciated

D-A-L Site and Help Forums Rules

Please do not PM me for help.These messages will be deleted without reading.
Please post your problem in the appropriate forum.

(Thanks )