Probleme mit Exchenge Cluster

ketchup73 · #1 (**permalink**) 26-04-2007, 04:07 AM

Hello
i have problems with my 2003 cluster. it goes down the second night straight. can anybody help me interpret this dump

************************************************** *****************************
* *
* Bugcheck Analysis *
* *
************************************************** *****************************

IRQL_NOT_LESS_OR_EQUAL (a)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high. This is usually
caused by drivers using improper addresses.
If a kernel debugger is available get the stack backtrace.
Arguments:
Arg1: 11cc110e, memory referenced
Arg2: 00000002, IRQL
Arg3: 00000001, value 0 = read operation, 1 = write operation
Arg4: e1046a61, address which referenced memory

Debugging Details:
------------------

WRITE_ADDRESS: 11cc110e

CURRENT_IRQL: 2

FAULTING_IP:
nt!MiQueryAddressState+37e
e1046a61 804f0e01 or byte ptr [edi+0Eh],1

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: DRIVER_FAULT_SERVER_MINIDUMP

BUGCHECK_STR: 0xA

PROCESS_NAME: Idle

LAST_CONTROL_TRANSFER: from e10515e7 to e1046a61

STACK_TEXT:
e10a320c e10515e7 fce1b398 00000000 fc15e7a0 nt!MiQueryAddressState+0x37e
e10a3234 f5b1d193 fc920720 00000100 18ffeabd nt!FsRtlAddBaseMcbEntry+0xde
WARNING: Stack unwind information not available. Following frames may be wrong.
e10a324c f5b311a1 fc51f500 00000000 00010000 vxio+0x4193
e10a32d4 f5b3ceac fc920720 e10a3318 e10a3324 vxio+0x181a1
e10a32f4 f5b1a6f2 fc920720 e10a3318 e10a3324 vxio+0x23eac
e10a3374 e103ec8a fcc56030 fcffdd30 fd961520 vxio+0x16f2
e10a33a4 f59607ab e10a33d4 f5960ba9 fe3e8030 nt!ExAllocatePoolWithQuotaTag+0x61
e10a33ac f5960ba9 fe3e8030 fcffdd30 00000001 CLASSPNP!ClassCompleteRequest+0x11
e10a33d4 e103ec8a 00000000 fce38e48 fcf7aed8 CLASSPNP!TransferPktComplete+0x1fd
e10a3404 f5bb19d5 fe3ec248 fbb5d230 fe3ec260 nt!ExAllocatePoolWithQuotaTag+0x61
e10a3430 f5bac559 00000000 fce38e48 fce38f24 EmcpBase+0x99d5
e10a344c f5bac6b8 fe42253c fe4224d8 00000000 EmcpBase+0x4559
e10a34bc e103ec8a fe426310 00e38e48 fbb5d230 EmcpBase+0x46b8
e10a34ec f5a8251f fe50ba30 fce38e48 e10a3530 nt!ExAllocatePoolWithQuotaTag+0x61
e10a34fc f5a81a7c fd595828 00000001 00000000 SCSIPORT!SpCompleteRequest+0x5e
e10a3530 f5a811d8 fe50ba30 fd595828 e10a35a7 SCSIPORT!SpProcessCompletedRequest+0x6a7
e10a35a8 e103eb0f fe50b9ec fe50b978 00000000 SCSIPORT!ScsiPortCompletionDpc+0x2bd
e10a3600 e103ac1f 00000000 0000000e 00000000 nt!NtAllocateVirtualMemory+0x14f1
e10a6b40 00000000 e10a6b48 e10a6b48 e10a6b50 nt!RtlpRunTable+0x2ff

STACK_COMMAND: kb

FOLLOWUP_IP:
vxio+4193
f5b1d193 ?? ???

SYMBOL_STACK_INDEX: 2

FOLLOWUP_NAME: MachineOwner

MODULE_NAME: vxio

IMAGE_NAME: vxio.sys

DEBUG_FLR_IMAGE_TIMESTAMP: 418b16cc

SYMBOL_NAME: vxio+4193

FAILURE_BUCKET_ID: 0xA_W_vxio+4193

BUCKET_ID: 0xA_W_vxio+4193

Followup: MachineOwner

i think its the volume manager. but i am not so good in reading dumbs

thanxs for help

jephree · #2 (**permalink**) 26-04-2007, 04:13 AM

See if this is any help as a first step:

http://support.microsoft.com/?kbid=839635

ketchup73 · #3 (**permalink**) 26-04-2007, 04:43 AM

thanxs for quick answer
i have read this page allready , but i think it does not help in my case
we have no problems with scsi device
we habe a problem with a harddisk based on a emc san , connected with fibre channel
i have read a entry in this board from june last year. a guy from thailand has the same problem i think. but there is no comment about to reparir this problem